Axle Stand Truck Short 15,000 kg

Jack Stand Truck Short 15,000 kg

15TJS Short

New product

The BORUM Ultra Heavy Duty Jack Stand is a reinforced pin style jack stand with industrial quality design and support bracing system to sustain heavy loads up to 15,000kg. Adjusts to match the job with a 450mm minimum lift height and 750mm maximum lift height.!!

20 Items

$467.50tax incl.

Estimate shipping cost

Submit

More info

Features:

  • High strength locking pin
  • Controlled pin holes for easy height adjustments
  • Turned post slide for easy quick adjustments
  • Conveniently located carry handle
  • Rugged base provides plenty of stability
  • Sold individually (not in pairs)

Specifications:

  • Safe Working Capacity: 15,000kg
  • Minimum Height: 450mm
  • Maximum Height: 750mm
  • Base Dimensions: 300 x 300mm

Related Products

‹ ›

Tradequip mobile waste oil drainers are designed to collect, store and carry waste oil and coolant from the service bay to bulk waste oil storage. Practical design including oversize drain bowls, sight gauges and integrated drain hoses minimise the risk of operator exposure and spillage. Reservoirs are available in a range of convenient sizes and equipped...

$438.90
In Stock

This top quality "Made for the Trade" large parts washer is perfect for cleaning down most components prior to assembly. It is designed and manufactured to Tradequip Quality Standards and has a very sturdy steel construction and quality enamelled finish. The "Quick Close" fire safe lid mechanism ensures operator protection in case of fire.

$302.50
In Stock

This top quality "Made for the Trade" large parts washer is perfect for cleaning down most components prior to assembly. It is designed and manufactured to Tradequip Quality Standards and has a very sturdy steel construction and quality enamelled finish. The "Quick Close" fire safe lid mechanism ensures operator protection in case of fire.

$500.50
In Stock

Tradequip Parts Washer Concentrate is a water-based, safer alternative to solvent based degreasers. It is speciaffically formulated for cleaning and degreasing automotive, engineering and industrial parts in Tradequip Parts Washers and washable surfaces. - 20Litres makes 100Litres

$148.50
In Stock

The Tradequip Jack Stands are ideally suited to the professional trade workshop. These ratchet type axle stands are designed with a cast iron support post, tough steel plate welded base and deep saddle for positive location under the vehicle. The cast iron post is equipped with angled teeth to prevent accidental release of load - the more weight applied,...

$104.50
In Stock

Tradequip Jack Stands are ideally suited to the professional trade workshop. These ratchet type axle stands are designed with a cast iron support post, tough steel plate welded base and deep saddle for positive location under the vehicle. The cast iron post is equipped with angled teeth to prevent accidental release of load - the more weight applied, the...

$184.80
In Stock

Tradequip Jack Stands are ideally suited to the professional trade workshop. These ratchet type axle stands are designed with a cast iron support post, tough steel plate welded base and deep saddle for positive location under the vehicle. The cast iron post is equipped with angled teeth to prevent accidental release of load - the more weight applied, the...

$313.50
In Stock

The BORUM Ultra Heavy Duty Jack Stand is a reinforced pin style jack stand with industrial quality design and support bracing system to sustain heavy loads up to 15,000kg. Adjusts to match the job with a 650mm minimum lift height and 1100mm maximum lift height !!

$570.90
In Stock

The BORUM Ultra Heavy Duty Jack Stand is a reinforced pin style jack stand with industrial quality design and support bracing system to sustain heavy loads up to 25,000kg. Adjusts to match the job with a 675mm minimum lift height and 1050mm maximum lift height.!!

$658.90
In Stock

The BORUM Ultra Heavy Duty Jack Stand is a reinforced pin style jack stand with industrial quality design and support bracing system to sustain heavy loads up to 25,000kg. Adjusts to match the job with a 415mm minimum lift height and 640mm maximum lift height.!!

$581.90
In Stock

The "Made for the Trade" Tradequip low profile moulded mechanics creeper comes complete with 6 x 75mm high quality swivel castors for easy manoeuvring. This creeper is equipped with a thick padded cushion headrest for extra comfort  and two convenient side moulded tool trays.

$88.00
In Stock

This 2-Stage telescopic Transmission Jack offers a wide range of versatility designed to help increase workshop productivity. For use with car and light truck transmissions. The universal mounting head provides a wide fore and aft tilt range. A wide base is enhanced by four heavy-duty steel swivel castors and both a ring handle and a pull bar for easier...

$999.90
In Stock

This 500kg capacity "Made for the Trade" Tradequip Telescopic Transmission Lifter has a 4 way tilt transmission mounting cradle with adjustable load support arms to fit all transmission pan flanges. The foot-operated quicklift pump frees up operator's hands when positioning for lift and the hand operated lower lever provides safety with its extra slow...

$977.90
In Stock

This professional 1,000kg Hydraulic Low Profile Transmission Jack is perfect for transmission installation and removal. Features smooth, manually operated hydraulic lifting and lowering and a 360° rotating handle for better load positioning.

$845.90
In Stock

The Tradequip wide chassis floor-style transmission jack is designed for work on heavy-duty transmissions.

$770.00
In Stock

The Tradequip Floor Jack Transmission Adapter quickly converts any hydraulic floor jack into a transmission jack. Featuring a durable construction, this floor jack transmission adapter is equipped with a safety chain. It has a 1 5/32" diameter post that most jacks can accommodate. This adapter quickly springs to action and converts your jack in no time.

$165.00
In Stock

This hydraulic engine crane has a 8 tonne long stroke lifting ram and single acting pump with a maximum load capacity of 1000kg. It quickly folds up designed to save space in the workshop. Very simple to use hydraulic operation via a single acting pump equipped with automatic safety valve to control the lowering speed. 

$495.00
In Stock

Designed to locate underneath vehicle wheels allowing precise and easy movement within confined spaces. Each fitted with four 90mm heavy duty castors. Robust steel manufacture enables up to 680kg weight to be carried on each dolly. 

$120.00
In Stock

A pair of wheel dollies provides an easy way to move a car, SUV, heavy machinery and more, all by yourself. Each dolly is fitted with four heavy duty swivel castors. Robust steel manufacture enables up to 450kg weight to be carried on each dolly. Designed to locate underneath vehicle wheels allowing precise and easy movement within confined spaces.

$120.00
In Stock

Vehicle Positioning Jacks make manoeuvring your vehicle safe and easy, without touching the chassis! Constructed from high-quality powder-coated steel, they have an impressive lifting capacity of 450kg each.

$395.00
In Stock

Allows work to be carried out on front wheel drive/transmission/drive shafts with engine suspended in-situ. Adjustable extension arms with locking feature. Neoprene support pads and adjustable screw. Designed to support and accurately position engines during maintenance operations such as replacing anti-vibration mountings and certain body panels.

$179.30
In Stock

The perfect accessory for engine cranes, this engine leveler helps protect your engine and vehicle from damage. Perfect for removing and installing engines, it allows you to change the angle of the engine by turning the swivel handle. Compatible with all brands of engine cranes.   

$99.00
In Stock

Ideal for the workshop or factory this chain hoist has a triple spur geared shaft and pinion with load braking. The compact gear housing allows use in areas of limited clearance. High quality welded chain with safety latch on the load hook.

$195.00
In Stock

Ideal for the workshop or factory this chain hoist has a triple spur geared shaft and pinion with load braking. The compact gear housing allows use in areas of limited clearance. High quality welded chain with safety latch on the load hook.

$195.00
In Stock
Sale!

Functionszero point, mm/inch USB data output Meet DIN862 Made of stainless steel Calibration certificate is included

$104.00
In Stock
Sale!

These units offer high build quality standard, good quality of materials used, larger than normal screen & the added feature of full-on water resistance.  Zero Point mm/inchMeasures: inside outside & DepthButtons: mm/in, on/off, zeroBattery CR2032, automatic power offUSB Data outputMade of stainless steel

$231.00
In Stock

Features:Exceptional fluid atomization Forged aluminum body with smooth anodised finish for corrosion resistance & easy cleaning Teflon seals & packaging Suitable for both oil and water based painting High grade stainless steel nozzle and needle for easy cleaning and long service life Complies to CE standards

$259.00
In Stock
Sale!

These units offer high build quality standard, good quality of materials used, larger than normal screen & the added feature of full-on water resistance. Zero Point mm/inchMeasures: inside outside & DepthButtons: mm/in, on/off, zeroBattery CR2032, automatic power offUSB Data outputMade of stainless steel

$157.00
In Stock

$1,595.00
In Stock

$1,795.00
In Stock